robotec
Hot Products
Contact Us
Jinan Robotec Machinery Co., Ltd.
Address:No. 88, West Huizhan Rd., High-Tech Zone, Jinan, Shandong, China
Tel:+86-531-68657576
Fax:+86-531-68657576
Mobile:+8615562612576
E-mail:admin@robotecnc.com
Home:robotec >> Industry news Industry news

Methods of use a Wood CNC Router

Author:admin Keyword:Methods of use a Wood CNC Router views:

A computer numerical control(CNC) router is a device controlled by a computer. This router is typically used for cutting wood and other materials, depending on the cutting tools installed. With a CNC wood router, you can make a precision cut over and over without having to remeasure your wood or angles. Operating a CNC router rather than a traditional router offers the ease of precision just by inputting a few measurements or uploading a template.

1. Input your specific measurements or upload your predesigned template to the CNC router. A template created in CAD or other drawing program can be uploaded, and the CNC router will automatically set itself to the specifications. Otherwise, you have to manually enter tool specs, speed, paths and cutd into the machine on the X, Y axis moves back and forth,and the Z axis moves up and down. Make sure that you havetaken the correct measurements on the wood prior to setting the machine.

2. Attach the cutting bit to the drill head that you need to perform the specific cuts on your wood. taken the correct measurements on the wood prior to setting the machine.forth, and the Z axis moves up and down. Make sure that you have taken the correct measurements on the wood prior to setting the machine.

3. Position the wood on the work table at the axis zero that corresponds to your input measurements. The zero is the starting point for the machine to begin cutting.

4.Start the vacuum pump. This will secure the wood to the work table at the zero position. Turn on the CNC router and watch closely as the router performs the cuts.