Engraving machine uniaxial or triaxial do not walk or move around is not normal
◆ advertising
Control are loose or fault; 2 corresponds to the axis of drive failure; 3 corresponding to the axis stepper motor failure; 4 corresponding to the coupling to break out or loose (coupling loose presenting symptoms, sculpture dislocation of the font); 5 corresponding to the screw fracture or screw-nut failure; 6 correspond to shaft slip fast failure; drive the number of segments, the current set and the software is not the same.
◆ advertising engraving machine z-axis control (bar knife)
Control are loose or fault; 2. Static interference; 3.z axis motor line failure; file path; 5 Inverter interference; computer system problem or a virus; 7.Z axis motor power enough, the coupling is loose; 8.Z axis of the drive current is too small, or signal lines are wrong.
Engraving machine error ◆ advertising
Control are loose or fault; two drive failures; stepper motor failure; 4. Static interference; motor line failure; data line failure; path; coupling breaks or loose; processing speed is too fast; (the corners of the system parameters acceleration is too large) 10. computer system or virus).