The test models --- into a star-1218FD enhanced stone engraving machine.
The purpose of this test --- Star into a stone carving of the function can not be carved granite?
A processing material --- granite; text --- "Kung Hei Fat Choy"; text size --- 4 cm;
Using the tool --- diamond knives, angle of 90 degrees, tip 0.4
1, single-line body deep the 2mm processing speed of 500mm / minute time 240 seconds
, In-line body deep 1mm processing speed 700mm / minute time 150 seconds
3, 3D italics deep the 2mm processing speed of 700mm / minute time
4, three-dimensional italics deep the 2mm processing speed 400mm / 5 minutes
Second, the processing material --- granite; text --- "fat"; text size --- 10 cm;
Using the tool --- diamond knives, ¢ 6 straight knife
A round shaped body deep 1mm processing speed of 300mm / minute time points.
Third, processing material --- granite; text --- "wealth"; text size --- 10 cm; use tool --- diamond knives, ¢ 6 straight knife
1 Cuyuan body of deep the 1mm processing speed 400mm / minute time 520 seconds
Test results, the Star Stone engraving machine with diamond dagger carved granite small print is the most suitable depth ofthree-dimensional font no more than 2MM, processing speed can accept, and the effect is exquisite, the cost of 150 yuan a knife,carved nearly 2000 word of 3 cm. Carved characters of diamond sintering loss of straight knife, the tool could be improved.
Observe the process and effects, we believe that the star into a stone engraving machine structure strong, powerful, flexible and convenient processing, beautifully carved effect, very competent stone engraving process, especially in the softer stone processingis nothing to fear, according to computer composition carved out of sophisticated text, graphics, and relief. Star Stone engraving machine is the ideal stone engraving machine will be able to solve a smaller investment in stone processing problems, improve work efficiency.