Why wood engraving machine knife too high? Resulting in lower wood engraving machine engraving rate!
Wood engraving machine to lift the knife is too high and thus wasted a lot of carrying knives, drop the knife time. Then you canmodify the settings? May be beginners in the use of woodworking engraving machine will encounter such a problem: the distance is too large to do relief carving tool carrying knives.
Tool put a knife is usually set too high due to safe Z height and the origin of a high degree of relief surface of the reason is too high. Method to solve a problem is security Z height and origin height is set to a relief appearance is relatively low value. Safe Zheight and the height of the origin of the value to set the tool path Manager page. Assurance tool harmonious collision process parts, and general use ArtCA M processing relief. Should try to be safe Z height values set to the minimum, thus reducing the air-way movement of the tool, improve processing efficiency.
The data are broken some customers often reflect such a question: woodworking engraving machine carved from a word to carveanother word Z-axis is not carrying knives.
Computer system failures have re-hardcover systems, problems like this is what causes it? Computer systems are vulnerable tovirus or Trojan order of destruction. If the customer Wentai carving software devices in the computer drive C below, then carvedafter the computer reinstall the system software will be lost, so you have to again device the Wentai 3D engraving software.Engraving software installations completed after the original parameters, which parameters are the default, some data need me toadjust. There is a carrying knives distance, when the first time I do a good job path custody, carrying knives distance to default of 0if I did not modify the above-mentioned phenomenon, there will be. Carrying knives distance under normal circumstances,modified 5-10 can, so that 1325 wood engraving machine will be in accordance with the value set automatically lift the knifecompleted sculpture will not scratch material. This will reduce unnecessary losses.